Engine Primer Hi Heat Black Matt for Alloy Metals and Plastics - 250gr
Engine Primer Hi heat Black for engine bikes and cars plastics and alloy parts.
Perfect to prepare your engine parts before painting.
Fast dry and wet on wet painting system
ATTENTION: the catalysts of all 2K paints must be used within a few days of receiving the material. Conversely, they should be kept in the fridge to prevent them from hardening.
ENGINE PRIMER BLACK MATT HI HEAT
Engine primer black matt 2K hi heat for alloy plastics and metals. This paint must be used to prepara all engine parts before hi heat engine paint application.
About plastics make your test to be sure before painting
APPLICATION OF SPRAY PAINT AND LIQUID 2K
1 Clean well all pieces of metal with acetone or our degreaser
2 Do not use nitro solveent or others
3 If you have the spray can shake well and start, if you have the 2K formula, put the catalyst in the base A and mix well (follow the mix ratio of 10% on weight)
4 Apply a first dry coat and wait 10 minutes
5 Apply a wet coat and wait 20 minutes
6 Apply another wet coat and wait for 1 hour
7 Now you can start to apply the paint you want direct on primer. Pleaso do not try to buff or sand the primer, this is not necessary. Just apply the paint
8 if you choose the Engine SPray Paint just shake and spray, if you choose the 2K paint mix the elements and start the application
NOTE:
- The way you apply the Engine paint is the same of point number 4-5-6 of this page
- If the spray can you have is the 2k spray for professional follow the instruction application
For other technical info please write to info@kustomservice.com