Scale Model Acrylic Black Primer Water Based - 30ml

SCALE MODEL ACRILYC AIRBRUSH BLACK PRIMER READY TO SPRAY

Scale model airbrush acrylic water based primer. Ready to spray for 0,3 or bigger airbrush. Good adesion over plastics, metals, alloy and lexan. Good elasticity with great resistance. This product can be sanded to remove small powder spots or little imperfection with 2000 mesh or smaller (water or dry sand paper).

MAIN FEATURES

Ready to spray

Water based non toxic product

Good for all surfaces or materials as wood, plastics, metals, alloys, elastic lexan from dynamic models ext. 

HOW TO DILUTE THE PRIMER

You can dilute the scale model primer with our water based thinner as you like.

More you dilute it, less will be its adhesion power

CORRECT PRESSURE

Use a pressure between 1 and 2 bar with a common airbrush of 0,3 nozzle.

HOW MANY LAYER MUST BE APPLIED TO HAVE BEST RESULTS?

One or two dry coats, dry time of 10 minutes and 2 medium wet coat every 15 minutes (20 or 30 minutes in cold places or winter time)

We can also accelerate dry time with an heat gun or airbrush cold air.

IS IT GOOD FOR LAQUER AND WATER BASE PAINT?

Kustomservice airbrush scal emodel primer is good for enamel, laquer, water based and all type of paint on the market.

The only rule to follow is: MUST BE DRY VERY WELL 

Timing at room temperature of 18/20 degrees celtius

- 30/60 minutes for water base paint

- 4/5 hours for all enamel, laquer or solvent paint in general.